Template talk:Infobox engine

This template is within the scope of WikiProject Automobiles, a collaborative effort to improve the coverage of automobiles on Wikipedia. If you would like to participate, please visit the project page, where you can join the discussion and see a list of open tasks.AutomobilesWikipedia:WikiProject AutomobilesTemplate:WikiProject AutomobilesAutomobile articles

Trucks

This template is within the scope of WikiProject Trucks, a collaborative effort to improve the coverage of trucks on Wikipedia. If you would like to participate, please visit the project page, where you can join the discussion and see a list of open tasks.TrucksWikipedia:WikiProject TrucksTemplate:WikiProject TrucksTrucks articles

Buses

This template is within the scope of WikiProject Buses, a collaborative effort to improve the coverage of buses on Wikipedia. If you would like to participate, please visit the project page, where you can join the discussion and see a list of open tasks.BusesWikipedia:WikiProject BusesTemplate:WikiProject Busesbus transport articles

Trains: Locomotives

Trains Portal

This template is within the scope of WikiProject Trains, an attempt to build a comprehensive and detailed guide to rail transport on Wikipedia. If you would like to participate, you can visit the project page, where you can join the project and/or contribute to the discussion. See also: WikiProject Trains to do list and the Trains Portal.TrainsWikipedia:WikiProject TrainsTemplate:WikiProject Trainsrail transport articles

Associated projects or task forces:
/
	This template is supported by the Locomotives task force.

Life expectancy B10,B50 (04/2017)[edit]

Probably B10 and B50 Life Expectancy could be added to the template. http://www.dieselhub.com/tech/b10-b50-life.html — Preceding unsigned comment added by 210.169.117.125 (talk) 12:54, 29 April 2017 (UTC)[reply]

Proposal: Common Application field (04/2017)[edit]

Common Application: School buses / medium-duty trucks. I dont know how to do it :-( — Preceding unsigned comment added by 210.169.117.125 (talk) 03:22, 30 April 2017 (UTC)[reply]

Thoughts . . . (2007)[edit]

Not wishing to screw things up, I just note that: although block and head suffice for the majority of contemporary auto engines, for engines such as the Corvair, Porsche (I assume), and Volkswagen, there are separate crankcase and cylinder rather than a single block; and for some engines there was monobloc (cylinders and head cast as one piece, separate crankcase) construction. I suggest that the template have these added, so as to read
| block =
| head =
| crankcase =
| cylinder barrels =
| monobloc =
Also, looks like it could use some added specs to cover Wankels, e.g. rotor materials, housing materials, rotor thickness (instead of bore and storke), etc. Gzuckier 16:02, 16 April 2007 (UTC)[reply]

Designer?[edit]

Can I suggest we add 'Designer' to the template? This is of relevance to a discussion on the Rover V8 and General Motors Buick 215 at the moment, and will be a valuable field for many of the more significant engine designs of the 20th century.Mja58 (talk) 12:17, 27 June 2013 (UTC)[reply]

Suggestion for rename[edit]

I suggest that this template shall be renamed Template:Reciprocating engine.

Reason: This template is also applicable for marine and aerospace installations (potentially with a couple of extra parameters). --Gwafton (talk) 09:30, 13 June 2014 (UTC)[reply]

Erkinalp9035 (talk) seconds. 14:48, 3 February 2017 (UTC)[reply]

Infobox engine was previously created. This may be moved to. Erkinalp9035 (talk) 09:10, 4 February 2017 (UTC)[reply]

Phantom parameter[edit]

| pistons = Ground Aluminum does not show in this infobox. Peter Horn User talk 18:35, 23 May 2015 (UTC)[reply]

Bore spacing[edit]

I would find a "bore spacing" field very useful. Anyone else have an opinion? Thanks, Mr.choppers | ✎ 02:18, 26 May 2015 (UTC)[reply]

I agree. Rps (talk) 12:17, 20 April 2016 (UTC)[reply]

So you know how much you can "bore out" the engine? Eddaido (talk) 08:32, 12 March 2017 (UTC)[reply]

Yes! And I am still waiting. Bore pitch. Mr.choppers | ✎ 02:49, 8 July 2019 (UTC)[reply]

Such Patience! Why not mention it on Wikipedia talk:WikiProject Automobiles? Regards, Eddaido (talk) 14:18, 8 July 2019 (UTC)[reply]

Requested move 12 March 2017[edit]

The following is a closed discussion of a requested move. Please do not modify it. Subsequent comments should be made in a new section on the talk page. Editors desiring to contest the closing decision should consider a move review. No further edits should be made to this section.

The result of the move request was: moved No objections (non-admin closure). TonyBallioni (talk) 04:27, 23 March 2017 (UTC)[reply]

Template:Infobox automobile engine → Template:Infobox engine – Also used for industrial engines. Erkinalp9035 (talk) 06:56, 12 March 2017 (UTC)[reply]

The above discussion is preserved as an archive of a requested move. Please do not modify it. Subsequent comments should be made in a new section on this talk page or in a move review. No further edits should be made to this section.

Proposal: Changes to label names and new field(s)[edit]

Some changes to the Template would improve it.
Generic introduction over, I propose the following changes:

Change the label name from Exhaust to Emissions to better reflect what that section is about
Change the label name from Combustion chamber to Layout or something else that is more suitable
Move the Chronology section to bottom of the Template to have a similar layout as Template:Infobox automobile
Move RPM range one section down and Combustion one section up (aka swap places) so that RPM range is above Output
Remove the linking from RPM range. As it currently is, it feels very out of place
Add a new field for Valves per cylinder that is linked to Multi-valve. This will give more basic information to a reader at a glance
Change the order of the fields in the (newly renamed) Layout section to this: Configuration / Valvetrain / Valves per cylinder / Displacement / Cylinder bore / Piston stroke / Compression ratio / Cylinder block alloy / Cylinder head alloy
Find a better name for the 'catch all' section that is Combustion
Change the order of the fileds in Combustion

Ideas, criticism, comments? See a horrible first mock-up ->here<- or take a look at the page history if page is wiped. 2A04:4540:110A:1501:5834:95F3:19FD:BE80 (talk) 20:28, 26 October 2017 (UTC)[reply]

Operating principle?[edit]

Currently, the infobox does not have an operating principle field. I suppose the operating principle the most distinctive design feature of any combustion engine and I seriously wonder why it has not been added yet. --Johannes Maximilian (talk) 14:48, 17 December 2018 (UTC)[reply]

Turbo boost pressure[edit]

The "turboboostpressure" field is there, but not usable. Can someone fix it? 101.128.126.147 (talk) 03:07, 27 April 2022 (UTC)[reply]

Related[edit]

Can we add a "related" field? Apologies if this has already been discussed. Mr.choppers | ✎ 01:15, 22 October 2023 (UTC)[reply]