Template:MYSint

Location	km	Exit	Name	Destinations	Notes
–

Template documentation[view] [edit] [history] [purge]

This template creates an entry in an MOS:RJL-compliant road junction list for a Malaysian road article, regardless of jurisdiction. It is a sister template to {{Jctint}} and is directly derived from {{Jctint/core}}.

Blank template[edit]

Single entry in the list[edit]

This is a typical entry for an expressway, or roads with numbered and named exits.

{{MYSint|exit|name|state=|sspan=|district=|dspan=|location=|lspan=|km=|km_ref=|type=|exit=|name=|road=|notes=}}

This is a typical entry for roads without numbered or named exits.

{{MYSint|state=|sspan=|district=|dspan=|location=|lspan=|km=|km_ref=|type=|road=|notes=}}

In Sabah, there are named but unnumbered intersections on some roads, in which case this can be used (note that the first parameter is empty).

{{MYSint||name|division=|divspan=|district=|dspan=|location=|lspan=|km=|km_ref=|type=|name=|road=|notes=}}

If a road is entirely within a single state/territory/division and/or a single district, feel free to omit the respective parameters.

To mark a notable or significant bridge, tunnel, layby, service area, toll plaza (the latter three are all notable) or other feature that isn't an exit, replace the |exit=, |name=, |road= and |notes= parameters with |place=, for example:

{{MYSint|exit|name|state=|sspan=|district=|dspan=|location=|lspan=|km=–|km_ref=|type=|place=}}

Icons should not be used for such an entry: they would be considered excessive per MOS:ICONS and MOS:ACCESS. The only icons that should be used are for route markers just before a road name.

Here's every parameter supported by the template. Drop parameters that are unnecessary.

{{MYSint|[exit/old]|name|[state/territory/division]=|[sspan/tspan/divspan]=|district=|district_special=|dspan=|location=|lspan=|km=|km_ref=|kspan=|type=[trans/concur/closed/incomplete/unbuilt/toll]|place=|pspan=|old=|ospan=|exit=|espan=|name=|namespan=|road=|rspan=|notes=|nspan=}}

Complete table syntax[edit]

{{MYSinttop|[exit/old]|name|region_col=yes|region_type=[state/territory/division]|district_col=yes|location_ref=|km_ref=|old_ref=|exit_ref=|name_ref=|dest_ref=|notes_ref=|length=}}
{{MYSint|[exit/old]|name|[state/territory/division]=|[sspan/tspan/divspan]=|district=|district_special=|dspan=|location=|lspan=|km=|km_ref=|kspan=|type=[trans/concur/closed/incomplete/unbuilt/toll]|place=|pspan=|old=|ospan=|exit=|espan=|name=|namespan=|road=|rspan=|notes=|nspan=}}
{{Jctbtm|col=[total number of columns]|key=[trans/concur/closed/incomplete/unbuilt/toll],...}}

With the correct parameters this will generate a complete, MOS:RJL-compliant junction list. If table entries that don't fit the constraints of this template are required (e.g. the "through to another road" rows), they can be inserted in between the templates.

Parameters[edit]

This is the TemplateData for this template used by TemplateWizard, VisualEditor and other tools. See a monthly parameter usage report for Template:MYSint in articles based on its TemplateData.

TemplateData for MYSint

Creates an entry in a Manual of Style-compliant road junction list for a Malaysian road.

Template parameters[Edit template data]
This template prefers inline formatting of parameters.
Parameter		Description	Type	Status
Exit number column(s)	`1`	Specify 'exit' to turn on the exit number column; specify 'old' to turn on both an old and new exit number columns; leave blank to omit. Example exit	String	suggested
Exit name column	`2`	Specify 'name' to turn on the exit name column, or leave blank to omit. Example name	String	suggested
State/territory	`state` `territory`	In Peninsular Malaysia, name of the state or territory this junction is in. Omit if spanning from a previous entry, or if the state/territory column is not used. Automatically linked. Example Penang	String	suggested
Division	`division`	In Sabah or Sarawak, name of the division this junction is in. Omit if spanning from a previous entry, or if the division column is not used. Automatically linked. Example Kuching	String	suggested
State/territory/division cell span	`sspan` `tspan` `divspan`	Number of rows to span the cell specified in the state, territory or division parameter. Default 1 Example 10	Number	suggested
District	`district`	The district of the state or division this junction is in. Omit if spanning from a previous entry, or if the district column is not used. Automatically linked. Example Penampang	String	suggested
District (plain)	`district_special`	The district of the state or division this junction is in. Not automatically wikilinked. Use this instead of the normal parameter if the link needs to be disambiguated. Example [[Betong District, Sarawak\|Betong]]	Content	optional
District cell span	`dspan`	Number of rows to span the cell specified in the district parameter. Default 1 Example 5	Number	suggested
Location	`location`	The general location of the junction. There may not necessarily be one if it is distant enough from any significant settlement, in which case use a – (en dash). Omit if spanning from a previous entry. Not automatically wikilinked. Example [[Bukit Besi]]	Content	suggested
Location cell span	`lspan`	Number of rows to span the cell specified in the location parameter. Default 1 Example 2	Number	suggested
Kilometre marker	`km`	The distance of this junction from the zeroth kilometre. If a range is to be specified, separate with –<br /> (en dash followed by line break). Default – Example 48.9	Number	suggested
Kilometre marker citation	`km_ref`	Citation for the specified kilometre marker. Use one of the existing citation templates instead of just plain text.	Template	optional
Kilometre marker cell span	`kspan`	Number of rows to span the cell specified in the kilometre marker parameter. Default 1 Example 2	Number	optional
Junction type	`type`	The special status of the junction; this will give the row a background colour. If this is used, further details must be specified in the notes cell, and the related key should be provided at the bottom of the table. Choose from one of: trans (route transition), concur (concurrency terminus), closed (closed permanently/for an extended period, or former junction), incomplete (junction does not allow all possible directions), unbuilt (under construction or unopened) or toll (junction is tolled as an exception to the rest of the road). Example incomplete	String	optional
Place	`place`	Name and details of the place (bridge, tunnel, service area, toll plaza, etc.). This spans the exit, name, destinations and notes columns. Omit if spanning from a previous entry. Example Awan Besar toll plaza (westbound; [[Barrier toll system\|barrier system]])	Content	optional
Place cell span	`pspan`	Number of rows to span the cell specified in the place parameter. Default 1 Example 2	Number	optional
Old exit number	`old`	The junction's old exit number, if there is one. Will only display if the first parameter is 'old'. Omit if spanning from a previous entry. Example 140	Number	optional
Old exit number cell span	`ospan`	Number of rows to span the cell specified in the old exit number parameter. Default 1 Example 2	Number	optional
Exit number	`exit`	The junction's exit number, if there is one. Will only display if the first parameter is 'exit or 'old'. Omit if spanning from a previous entry. Example 2603	Number	suggested
Exit number cell span	`espan`	Number of rows to span the cell specified in the exit number parameter. Default 1 Example 2	Number	optional
Junction name	`name`	Name of the junction, if there is one. Will only display if the second parameter is 'name'. Do not wikilink. Omit if spanning from a previous entry. Example Changkat Jering	String	suggested
Junction name cell span	`namespan`	Number of rows to span the cell specified in the junction name parameter. Default 1 Example 2	Number	optional
Road(s) and destinations	`road`	Route marker(s), followed by name of immediate road(s) and destinations of the junction, as signposted. Link road names and destinations, except if they were recently used in the same table to avoid overlinking. Omit if spanning from a previous entry. Example {{MES-E(2)\|22}} [[Senai–Desaru Expressway]] – [[Ulu Tiram]], [[Pasir Gudang]], [[Desaru]]	Content	suggested
Road cell span	`rspan`	Number of rows to span the cell specified in the road parameter. Default 1 Example 2	Number	optional
Notes	`notes`	Any notes for the junction. If type is used, details of the restriction must be specified here. Omit if spanning from a previous entry. Example Westbound exit, eastbound entrance only.<br />Western terminus of concurrency with [[AH141]].	Content	suggested
Notes cell span	`nspan`	Number of rows to span the cell specified in the notes parameter. Default 1 Example 2	Number	optional

Blank template[edit]

Single entry in the list[edit]

Complete table syntax[edit]

Parameters[edit]

See also[edit]