Template:Chembox/testcases3

Add links
From Wikipedia, the free encyclopedia


All parameters used, per section

Chembox top section[edit]

Purge

Somename[1][2]
Names[3]
IUPAC name
IUPACname
Preferred IUPAC name
PIN
Systematic IUPAC name
Sysname
Other names
katrina, john
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Somename[4][5]
Names[6]
IUPAC name
IUPACname
Preferred IUPAC name
PIN
Systematic IUPAC name
Sysname
Other names
katrina, john
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).

Explosive[edit]

Purge

Chembox/testcases3
Explosive data[7]
Shock sensitivity ss
Friction sensitivity frs
Detonation velocity detv
RE factor ref
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Chembox/testcases3
Explosive data[8]
Shock sensitivity ss
Friction sensitivity frs
Detonation velocity detv
RE factor ref
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).

Hazards[edit]

Purge

Carbon monoxide
Hazards[9]
Occupational safety and health (OHS/OSH):
Main hazards
 mnhaz
Ingestion hazards
 inges
Inhalation hazards
 inhal
Eye hazards
 eye
Skin hazards
 skin
GHS labelling:
ghpics
ghwrd [→Category:GHS errors]
hph
ppph
NFPA 704 (fire diamond)
[10]
NFPA 704 four-colored diamondHealth 2: Intense or continued but not chronic exposure could cause temporary incapacitation or possible residual injury. E.g. chloroformFlammability 1: Must be pre-heated before ignition can occur. Flash point over 93 °C (200 °F). E.g. canola oilInstability 3: Capable of detonation or explosive decomposition but requires a strong initiating source, must be heated under confinement before initiation, reacts explosively with water, or will detonate if severely shocked. E.g. hydrogen peroxideSpecial hazard W: Reacts with water in an unusual or dangerous manner. E.g. sodium, sulfuric acid
2
1
3
W
Flash point fpt −173 to 27 °C; −280 to 80 °F; 100 to 300 K[11] note
somewhere < 25 °C (77 °F; 298 K)[12] nots
Explosive limits lim
tlv, twa (TWA), stel (STEL), tlvc (C)
Lethal dose or concentration (LD, LC):
ld50
lc50
NIOSH (US health exposure limits):[13]
PEL (Permissible)
 pel
REL (Recommended)
 rel
IDLH (Immediate danger)
 idlh
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Carbon monoxide
Hazards[14]
Occupational safety and health (OHS/OSH):
Main hazards
 mnhaz
Ingestion hazards
 inges
Inhalation hazards
 inhal
Eye hazards
 eye
Skin hazards
 skin
GHS labelling:
ghpics
ghwrd [→Category:GHS errors]
hph
ppph
NFPA 704 (fire diamond)
[15]
NFPA 704 four-colored diamondHealth 2: Intense or continued but not chronic exposure could cause temporary incapacitation or possible residual injury. E.g. chloroformFlammability 1: Must be pre-heated before ignition can occur. Flash point over 93 °C (200 °F). E.g. canola oilInstability 3: Capable of detonation or explosive decomposition but requires a strong initiating source, must be heated under confinement before initiation, reacts explosively with water, or will detonate if severely shocked. E.g. hydrogen peroxideSpecial hazard W: Reacts with water in an unusual or dangerous manner. E.g. sodium, sulfuric acid
2
1
3
W
Flash point fpt −173 to 27 °C; −280 to 80 °F; 100 to 300 K[16] note
somewhere < 25 °C (77 °F; 298 K)[17] nots
Explosive limits lim
tlv, twa (TWA), stel (STEL), tlvc (C)
Lethal dose or concentration (LD, LC):
ld50
lc50
NIOSH (US health exposure limits):[18]
PEL (Permissible)
 pel
REL (Recommended)
 rel
IDLH (Immediate danger)
 idlh
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).

Identifiers[edit]

Purge

Chembox/testcases3
Identifiers[19]
3D model (JSmol)
3DMet
Abbreviations abbr/sbox
beilst
ChEBI
ChEMBL
ChemSpider
DrugBank
EC Number
  • einecs
geme
KEGG
MeSH meshname
RTECS number
  • rtecs
UNII
UN number unnnr
  • InChI=/S
  • inchiooo
  • smi0cmt: smi0
  • smi1cmt: smi1
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Chembox/testcases3
Identifiers[20]
3D model (JSmol)
3DMet
Abbreviations abbr
beilst
ChEBI
ChEMBL
ChemSpider
DrugBank
EC Number
  • einecs
geme
KEGG
MeSH meshname
RTECS number
  • rtecs
UNII
UN number unnnr
  • InChI=/S
  • inchiooo
  • smi0cmt: smi0
  • smi1cmt: smi1
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).

InChI[edit]

Purge CASNo5=none

Chembox/testcases3
Identifiers
  • InChI=1/Sabc
  • InChI=1/abc
  • InChI=1/abc
  • InChI=1/abc
  • InChI=
  • InChI=InChI
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
inchi test
Identifiers
  • InChI=1/Sabc
  • InChI=1/abc
  • InChI=1/abc
  • InChI=1/abc
  • InChI=InChI
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).

Props[edit]

Purge

Chembox/testcases3
Properties[22]
form
Molar mass 312.3456 mm_notes
Appearance appear
Odor odrodour
Density dens
Melting point mp [convert: invalid number]
Boiling point bp −42 to −42 °C; −44 to −43 °F; 231 to 231 K
subc
sol
Solubility product (Ksp) of prodass
 prod
Solubility in london soloth
Solubility in so1 sl1
Solubility in solv5 solu5
log P logp
hc
Atmospheric OH rate constant
 ohc
Acidity (pKa) pka
Basicity (pKb) pkb
Isoelectric point isopt
UV-vis (λmax) lab
Absorbance abs
Band gap bgap
Electron mobility elmob
spec
magsus
Thermal conductivity thermc
refr
Viscosity visc
crithr
dip
Hybridisation orb
spec
Pore volume porev
Average Pore Size avgpore
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Chembox/testcases3
Properties[25]
form
Molar mass 312.3456 mm_notes
Appearance appear
Odor odrodour
Density dens
Melting point mp [convert: invalid number]
Boiling point bp −42 to −42 °C; −44 to −43 °F; 231 to 231 K
subc
sol
Solubility product (Ksp) of prodass
 prod
Solubility in london soloth
Solubility in so1 sl1
Solubility in solv5 solu5
log P logp
hc
Atmospheric OH rate constant
 ohc
Acidity (pKa) pka
Basicity (pKb) pkb
Isoelectric point isopt
UV-vis (λmax) lab
Absorbance abs
Band gap bgap
Electron mobility elmob
spec
magsus
Thermal conductivity thermc
refr
Viscosity visc
crithr
dip
Hybridisation orb
spec
Pore volume porev
Average Pore Size avgpore
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).

Formula & Molar Mass (param change)[edit]

Purge

OLD
Chembox/testcases3
Properties
C1H2
Molar mass 555.12345678 mm_notes
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Chembox/testcases3
Properties
C1H2
Molar mass 555.12345678 mm_notes
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
OLD - no Round
Chembox/testcases3
Properties
C1H2
Molar mass 555.12345678 mm_notes
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Chembox/testcases3
Properties
C1H2
Molar mass 555.12345678 mm_notes
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).

new[edit]

Chembox/testcases3
Properties
C1H2
Molar mass 555.12345678 mm_notes
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Chembox/testcases3
Properties
C1H2
Molar mass 555.12345678 mm_notes
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
no round
Chembox/testcases3
Properties
C1H2
Molar mass 555.12345678 mm_notes
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Chembox/testcases3
Properties
C1H2
Molar mass 555.12345678 mm_notes
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).

mixed[edit]

Chembox/testcases3
Properties
C1H2
Molar mass 555.12345678 mm_notes
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Chembox/testcases3
Properties
C1H2
Molar mass 555.12345678 mm_notes
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).

C=1, H=2 & Molar Mass (param change)[edit]

Purge

OLD
Chembox/testcases3
Properties
C10H20
Molar mass 555.12345678 mm_notes
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Chembox/testcases3
Properties
C10H20
Molar mass 555.12345678 mm_notes
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
OLD - no Round
Chembox/testcases3
Properties
C10H20
Molar mass 555.12345678 mm_notes
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Chembox/testcases3
Properties
C10H20
Molar mass 555.12345678 mm_notes
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).

new[edit]

Chembox/testcases3
Properties
C10H20
Molar mass 555.12345678 mm_notes
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Chembox/testcases3
Properties
C10H20
Molar mass 555.12345678 mm_notes
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
no round
Chembox/testcases3
Properties
C10H20
Molar mass 555.12345678 mm_notes
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Chembox/testcases3
Properties
C10H20
Molar mass 555.12345678 mm_notes
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).

mixed[edit]

Chembox/testcases3
Properties
C10H20
Molar mass 555.12345678 mm_notes
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Chembox/testcases3
Properties
C10H20
Molar mass 555.12345678 mm_notes
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).

Pharma[edit]

See also Template:Chembox/testcases8.

Purge

drugb, ATC
Pharmacology[39]
aprefasuff (WHO) asuppl
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
drugb, ATC
Pharmacology[40]
aprefasuff (WHO) asuppl
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).

Related[edit]

Purge

Chembox/testcases3
Related compounds[41]
Other anions
 -
Other cations
 Phosphine
Arsine
Stibine
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Chembox/testcases3
Related compounds[42]
Other anions
 -
Other cations
 Phosphine
Arsine
Stibine
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).

Structure[edit]

Purge

Chembox/testcases3
Structure[43]
Face-centered cubic, cF1924
Fm3m, No. 225
-
a = 1.4154 nm, b = -, c = -
α = 40.4°, β = 90°, γ = 90°
octahedral at Fe
Linear
Hybridisation -
2.98 D
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Chembox/testcases3
Structure[44]
Face-centered cubic, cF1924
Fm3m, No. 225
-
a = 1.4154 nm, b = -, c = -
α = 40.4°, β = 90°, γ = 90°
octahedral at Fe
Linear
Hybridisation -
2.98 D
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).

Supplement[edit]

Purge

Chembox/testcases3
Supplementary data page
[[]]
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Chembox/testcases3
Supplementary data page
[[]]
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).

Thermo[edit]

Purge

Carbon monoxide
Thermochemistry[45]
29.1 J/K mol
197.7 J·mol−1·K−1
−110.5 kJ·mol−1
x
−283.4 kJ/mol
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
Carbon monoxide
Thermochemistry[46]
29.1 J/K mol
197.7 J·mol−1·K−1
−110.5 kJ·mol−1
x
−283.4 kJ/mol
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).

Chembox Footer[edit]

Purge

Chembox/testcases3
Stereo structural formula of the ammonia molecule
Ball-and-stick model of the ammonia molecule
Ball-and-stick model of the ammonia molecule
Space-filling model of the ammonia molecule
Space-filling model of the ammonia molecule
Names
IUPAC name
Azane
Preferred IUPAC name
3-[(2R)-2,4-Dihydroxy-3,3-dimethylbutanamido]propanoic acid
Systematic IUPAC name
SNpo/usahrgpierw/uhgpieqruhgphg()opib()[]oihb/77%()lkhbg)_i[&&&77]
Other names
Hydrogen nitride
Trihydrogen nitride
Nitro-Sil
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
checkY verify (what is checkY☒N ?)
Chembox/testcases3
Stereo structural formula of the ammonia molecule
Ball-and-stick model of the ammonia molecule
Ball-and-stick model of the ammonia molecule
Space-filling model of the ammonia molecule
Space-filling model of the ammonia molecule
Names
IUPAC name
Azane
Preferred IUPAC name
3-[(2R)-2,4-Dihydroxy-3,3-dimethylbutanamido]propanoic acid
Systematic IUPAC name
SNpo/usahrgpierw/uhgpieqruhgphg()opib()[]oihb/77%()lkhbg)_i[&&&77]
Other names
Hydrogen nitride
Trihydrogen nitride
Nitro-Sil
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
checkY verify (what is checkY☒N ?)

empty secs[edit]

Purge

all sec
Explosive data
RE factor RF
Identifiers
gm
Pharmacology
Pharmacokinetics:
xcr
Properties
Odor odr
Related compounds
Other anions
 oa
Structure
pg
Thermochemistry
ent
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
all sec
Explosive data
RE factor RF
Identifiers
gm
Pharmacology
Pharmacokinetics:
xcr
Properties
Odor odr
Related compounds
Other anions
 oa
Structure
pg
Thermochemistry
ent
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).

LC50/LD50[edit]

ld50 - lc50
Hazards
Lethal dose or concentration (LD, LC):
fityy
sixty
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
ld50 - lc50
Hazards
Lethal dose or concentration (LD, LC):
fityy
sixty
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).

refs[edit]

Purge

  1. ^ [www.example.com "someref"]. {{cite web}}: Check |url= value (help)
  2. ^ Cbox_ref
  3. ^ Names_ref
  4. ^ [www.example.com "someref"]. {{cite web}}: Check |url= value (help)
  5. ^ Cbox_ref
  6. ^ Names_ref
  7. ^ Explo_ref
  8. ^ Explo_ref
  9. ^ Haz_ref
  10. ^ rrr
  11. ^ rrr
  12. ^ rrr
  13. ^ "NIOSH Pocket Guide to Chemical Hazards".
  14. ^ Haz_ref
  15. ^ rrr
  16. ^ rrr
  17. ^ wwww
  18. ^ "NIOSH Pocket Guide to Chemical Hazards".
  19. ^ Id_ref
  20. ^ Id_ref
  21. ^ Hello world
  22. ^ Props_ref
  23. ^ br
  24. ^ Hello world
  25. ^ Props_ref
  26. ^ br
  27. ^ Hello World Mass
  28. ^ Hello World Mass
  29. ^ Hello World Mass
  30. ^ Hello World Mass
  31. ^ Hello World Mass mix
  32. ^ Hello World Mass mix
  33. ^ Hello World Mass
  34. ^ Hello World Mass
  35. ^ Hello World Mass
  36. ^ Hello World Mass
  37. ^ Hello World Mass mix
  38. ^ Hello World Mass mix
  39. ^ Pharm_ref
  40. ^ Pharm_ref
  41. ^ Rel_ref
  42. ^ Rel_ref
  43. ^ Struct_ref
  44. ^ Struct_ref
  45. ^ Therme_ref
  46. ^ Therme_ref
Retrieved from "https://en.wikipedia.org/w/index.php?title=Template:Chembox/testcases3&oldid=1116642412"