Talk:Polydimethylsiloxane

Titled

Question for the caretaker(s) of this page: in the Chemistry section, the page says: "The chemical formula for PDMS is (H3C)3[Si(CH3)2O]nSi(CH3)3..." . Shouldn't this be "(H3C)3 Si O [Si(CH3)2O]nSi(CH3)3" ? my chemistry is alittle rusty but I think this needs to be there. (?true?). - lanephil, 2/25/08 —Preceding unsigned comment added by Lanephil (talk • contribs) 18:58, 25 February 2008 (UTC)

Are there also NON-organic polymers? I mean, because I think ALL polymers are organic, the word 'organic' in the first sentence is not necesary...

There are. As water is removed from phosphoric acid, for example, it becomes a long-chain polymer (see polyphosphate). One can also think of glass as a branching polymer with a backbone similar to silicone (a polysilicate). I'm sure there are other examples as well. But you're right that structural polymers are usually organic.--Joel 20:44, 12 April 2006 (UTC)

What's the Absorption Coefficient?

It's "optically clear"...... Anyone might know about this?

skin lotion

Dimethicone (1%) is listed as the "active ingredient" for "skin protection" in "CVS advanced hearling fragrance free lotion"; should skin something be mentioned as an application? Mike Linksvayer 21:02, 13 March 2007 (UTC)

Yes, its widely used as a skin protectant. I've added this in the article.

its also used in lubes.. pjur and probably others. trying to get some info on it when i found this page. more info on its safety would be welcome.

More than what? More than where it says it "is generally considered to be inert, non-toxic and non-flammable" and that "The Cosmetic Ingredient Review's (CIR) Expert Panel, has concluded that dimethicone and related polymers are 'safe as used in cosmetic formulations' [1]"? What are you looking for exactly? Some citation that it's actually not safe? I guess we could make one up for you. Here you go: [2]. 198.49.180.254 20:12, 14 September 2007 (UTC)

where can u find the history of this chemical at? like when it was discovered etc.? —Preceding unsigned comment added by 74.194.145.34 (talk) 03:39, 15 October 2007 (UTC)

Breast Implant Usage Safety Concern

What were/are the concerns with Polydimethylsiloxane's safety as a breast implant filler? The article is vague and I'd like to know more about them.24.83.148.131 (talk) 10:38, 25 May 2008 (UTC)BeeCier

Other Synonyms for Polydimethylsiloxane

I was looking on the web for info on the additive methyl silicone which was listed as an ingredient on my juice bottle. It turns out that it is just another synonym for Polydimethylsiloxane. Other synonyms are dimethicone, dimethyl silicone, methylpolysilicone and simethicone. Can someone edit the article to include these? Thank you.24.83.148.131 (talk) 10:43, 25 May 2008 (UTC)BeeCier

WikiProject Food and drink Tagging

This article talk page was automatically added with {{WikiProject Food and drink}} banner as it falls under Category:Food or one of its subcategories. If you find this addition an error, Kindly undo the changes and update the inappropriate categories if needed. The bot was instructed to tagg these articles upon consenus from WikiProject Food and drink. You can find the related request for tagging here . Maximum and carefull attention was done to avoid any wrongly tagging any categories , but mistakes may happen... If you have concerns , please inform on the project talk page -- TinucherianBot (talk) 17:45, 3 July 2008 (UTC)

Mechanical Properties

It is a bit of a simplification to describe it as it is in this article. PDMS is availible in a wide range of viscosities that is basically down to the chain length. Some are 100Cst at room temperature whilst 50000CSt is no uncommon. I think whoever added this section has maybe assumed that PDMS is PDMS regardless.

Further, not all PDMS will crosslink. It is dependent on the terminal groups present on the chain. In the case where an Si(CH3)3 group is terminal this will not crosslink under condensation conditions (using a tin catalyst) or indeed using an addition catalyst (Platinum). Where it is methyl terminated you have silicone oil (but it is still PDMS).

The types that crosslink are classified (generally) as either Condesation or Addition. I'm not completely familiar with addition cure, but with condensation cure the terminal groups are generally hyodroxy silane (Si(CH3)2OH). Other groups will work, but this is probably most common. —Preceding unsigned comment added by 194.105.181.145 (talk) 13:12, 14 August 2009 (UTC)

Permanent bonding to glass?

After the plasma treatment, the bonding to a glass surface is not permanent. It is reversible and literature exist on this subject. —Preceding unsigned comment added by 128.178.153.51 (talk) 15:14, 9 October 2009 (UTC)

anorganic.

It does not contain any C (carbon) atoms, so it's anorganic.

One could say its pseudo-organic or something, since the Si approximates the C structures somewhat, but according to the general classification rules it's anorganic. see Organic chemistry

--80.66.10.152 (talk) 13:46, 2 August 2011 (UTC)

PDMS does contain carbon atoms – two of them per silicon, in fact. The empirical formula is C₂H₆OSi. So it's organic. Anorganic isn't a word in English – the word is inorganic. --Ben (talk) 13:58, 2 August 2011 (UTC)

Risks

Does anyone think a section on risks maybe needed? At least there seems to be evidence people are concerned about it. Hence either way, risk or no risk it would be important to clarify? Meepdeedoo (talk) 13:38, 5 December 2011 (UTC)

Amodimethicone

"Amodimethicone" redirects here, but that term is not defined, nor even mentioned, anywhere in the article. 86.179.113.84 (talk) 13:25, 17 May 2012 (UTC)

It was only mentioned in one of the reference titles so I've added, for now, an external link to show its complex structure. - Rod57 (talk) 00:39, 24 August 2012 (UTC)

Barrier to berms

Dimethicone is used in barrier creams, for eg. 3M's Cavilon, by ostomy patients. It is supposed to prevent the acid from burning the skin, and at the same time, it helps prevent the bacteria from infecting the site, too. The question is, how effective of a barrier is it against gacteria? How about giruses? — Preceding unsigned comment added by 108.46.103.12 (talk) 17:49, 29 December 2013 (UTC)

Is polydimethylsiloxane always liquid?

I've been looking into solid silicone, e.g. as used in caulking. As part of my search, I came across this article, and thought I was reading about the correct compound, which could be liquid or solid based on its level of polymerization. However, I finally realized that the introductory paragraph clearly states that polydimethylsiloxane is known as dimethicone, and "is one of several types of silicone oil." Oils are liquids, which means polydimethylsiloxane is a liquid, and is not what I'm looking for. But then again, it also says that one application is as elastomers, which are solids.

I initially thought there was a grammar problem, and that one application of polydimethylsiloxane is as a type of silicone oil. But, reading the rest of the article I found no clear statement of this, and ended up flummoxed.

Is polydimethylsiloxane always liquid? Or, by adjusting its level of polymerization and cross-linking can it be made into a solid? Either way, the introductory paragraph should be clear. -- Dan Griscom (talk) 10:59, 1 October 2015 (UTC)

"poly" implies any n>2. For small values of n it has a low viscosity. For larger values of n it is thicker at the same temperature. For a specific n it is more viscose at lower temperatures. This is similar to glasses, rubbers, or oils.LeadSongDog come howl! 17:52, 19 February 2016 (UTC)

External links modified

Hello fellow Wikipedians,

I have just modified one external link on Polydimethylsiloxane. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:

• Corrected formatting/usage for http://www.nrrbs.com.au/chemicalspulse.htm

When you have finished reviewing my changes, please set the checked parameter below to true or failed to let others know (documentation at {{Sourcecheck}}).

This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}} (last update: 18 January 2022).

• If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
• If you found an error with any archives or the URLs themselves, you can fix them with this tool.

Cheers.—^{cyberbot II}_{Talk to my owner:Online} 20:31, 1 April 2016 (UTC)

Update on citation intensity

From SciFinder, Sept 21, 2016 search of "pdms"

• total references: 32235
• since 2000: 30200
• since 2010: 18415 (140 reviews)
• since 2014: 6822

--Smokefoot (talk) 16:39, 21 September 2016 (UTC)

External links modified

Hello fellow Wikipedians,

I have just modified one external link on Polydimethylsiloxane. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:

• Added archive https://web.archive.org/web/20120223092733/http://www.umass.edu/newsoffice/newsreleases/articles/146885.php to http://www.umass.edu/newsoffice/newsreleases/articles/146885.php

When you have finished reviewing my changes, you may follow the instructions on the template below to fix any issues with the URLs.

This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}} (last update: 18 January 2022).

• If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
• If you found an error with any archives or the URLs themselves, you can fix them with this tool.

Cheers.—InternetArchiveBot (Report bug) 21:24, 12 January 2018 (UTC)

Dimethiconol

Went looking for information on dimethiconol and got re-directed to this article. Unfortunately, this is _NOT_ dimethiconol. Dimethiconol is reported to have a different molecular structure, different solubility and a different molecular weight.

Unfortunately, the search engine god -- who shall remain nameless -- does not make this distinction so it is very hard to find actual information on "...conol" vs. "...cone"!

I'm no chemist so I don't know the details, but could someone in the chemistry field write up an article (or address the distinction in the present poly... article)?

Excerpts from other web pages:

• According to scientific consultant Yolanda Anderson, both of these two polymers often get mistaken for one another, because they are essentially equivalent in their performance in regard to the amount of deposition and when coming hair wet. The differences lie in their performance in other instances occurs, because dimethiconol has an increased molecular weight and has a different end group with hydroxyl (-OH) groups and most of those groups contain alcohols. Despite those differences they are very similar.

• Dimethiconol is a silicone based polymer that resembles Dimethicone, except that molecules of Dimethiconol end with hydroxyl (-OH) groups.

Thank you kindly. JimScott (talk) 21:22, 28 February 2018 (UTC)

The article does _NOT_ claim to be about dimethiconol.--Smokefoot (talk) 00:21, 1 March 2018 (UTC)

References

Request: information regarding production

My use is specifically as a food additive. I want to hear how it is typically derived on an industrial scale, to verify how it fits into some diet restrictions, like being vegan.

Thanks. 159.2.201.18 (talk) 00:03, 18 February 2022 (UTC)

Dimethicone

How do I pronounce 2603:8001:C900:A2D4:7811:AB02:9A50:C42A (talk) 08:29, 5 September 2022 (UTC)