Talk:Amplitude

Physics High‑importance

	Physics portal This article is within the scope of WikiProject Physics, a collaborative effort to improve the coverage of Physics on Wikipedia. If you would like to participate, please visit the project page, where you can join the discussion and see a list of open tasks.PhysicsWikipedia:WikiProject PhysicsTemplate:WikiProject Physicsphysics articles
High	This article has been rated as High-importance on the project's importance scale.

Electrical engineering Low‑importance

	Engineering portal This article is within the scope of WikiProject Electrical engineering, a collaborative effort to improve the coverage of Electrical engineering on Wikipedia. If you would like to participate, please visit the project page, where you can join the discussion and see a list of open tasks.Electrical engineeringWikipedia:WikiProject Electrical engineeringTemplate:WikiProject Electrical engineeringelectrical engineering articles
Low	This article has been rated as Low-importance on the project's importance scale.

Merge[edit]

It seems to me that pulse amplitude simply describes amplitude and then adds "...of a pulse". TomViza 09:47, 29 January 2007 (UTC)[reply]

Why?[edit]

Hmm, it's really not a great idea to use y to mean two different things, in one short article. Can we either have a different variable for the simple wave equation (which anyway needs its terms explained), or change the diag? cheers, JackyR 08:39, 18 February 2006 (UTC)[reply]

y stands for the amplitude and the displacement, but in the diagram they're the same thing. SURE>>>>>

"maximum disturbance"[edit]

The artical states that "Amplitude [is the] ... maximum disturbance ..." but "maximum" suggests "from peak to trough" whereas it is actually from distance from the average or centre y position to the peak OR trough (as the diagram correctly shows). Can this wording be improved without futher complicating the statement.

A disturbance is the movement of something away from its normal or optimum configuration, so the maximum distrubance is the distance from the average or centre. The peak and trough are both "disturbed" states, while for many systems the center is the equilibrium point.--Srleffler 17:33, 28 March 2006 (UTC)[reply]

Why is Photon Energy proportional to frequency, and not Amplitude ? It seems to me that when a wave disturbance is produced in any medium, the amount of force over time (hence work) would register as an increase in AMPLITUDE of the wave disturbance at that point, as opposed to an increase in FREQUENCY. So why, in electromagnetic waves such as photons, is the formula E = h * v (frequency), and amplitude has nothing to do with it ?

This article is very verbose, can we have someone clean it up so it is more accessible to someone who just needs a quick reference?

I don't think it should be added on. It may be a similar and very short definition, but it's still different from amplitude.

-Lana Morgan

Question[edit]

hii this is jot..sorry i did t get any information about amplitude...the given information is very differant i think what type of my book information so plzz give me some detail —Preceding unsigned comment added by 122.109.55.87 (talk) 07:14, 23 March 2009 (UTC)[reply]

Please take questions to WP:Reference desk/science, this page is for improving the article. SpinningSpark 17:57, 23 March 2009 (UTC)[reply]

Peak to Peak vs. RMS[edit]

When most people refer to amplitude, they are implicitly talking about peak to peak amplitude, not rms. So I think we should mention that the term amplitude, when used without any qualifiers, is referring to peak to peak. Any comments? —Preceding unsigned comment added by 131.183.23.225 (talk) 21:21, 15 September 2009 (UTC)[reply]

That depends on your background and discipline. As an electrical engineer I would naturally think in terms of rms and seek meters that are calibrated in that way. Astronomers, on the other hand are used to dealing with semi-major axes (ie peak amplitude). Yet again, mariners will typically measure the amplitude of a swell peak-to-peak. You cannot say that amplitude without qualifiers means anything in particular without context. Unless you have a source that states otherwise. SpinningSpark 22:35, 17 September 2009 (UTC)[reply]

Electric examples[edit]

In electricity, the current meaning of amplitude concerns the voltage caracteristic of a signal.

Question : Could one speak of amplitude of the intensity caracteristic ? In this case an amplifier (see amplifier page) could be an intensity amplifier ! But in current usage an amplifier is a voltage amplifier. Any ideas ?

--Mario CUSENZA (talk) 10:14, 9 April 2010 (UTC)[reply]

Electrical science does not in any way limit the meaning of amplitude to voltage. One can equally speak of current amplitude or electric field intensity amplitude. Likewise, it is perfectly possible to have a current amplifier, or a power amplifier. Not sure what you have in mind with "intensity amplifier" though. SpinningSpark 11:42, 9 April 2010 (UTC)[reply]

OK, the doubt came from the amplifier article which says an amplifier increases the amplitude of a signal. The right sentence would be "an amplifier increases the power of a signal". Would it be voltage amplitude, current amplitude or both of them.--Mario CUSENZA (talk) 16:44, 10 April 2010 (UTC)[reply]

Anti-climax[edit]

"Semi-amplitude...is important in the search for exoplanets."

True or not, this is out of place, given that this is the only application that is exemplified. It makes the article read more like a wiki than an encyclopedia. 67.9.166.98 (talk) 05:55, 20 June 2010 (UTC)[reply]

I don't understand your point. Are you saying that one should not quote single examples? SpinningSpark 11:00, 20 June 2010 (UTC)[reply]

Sound wave Example[edit]

Is the amplitude of a sound wave the difference between its equilibrium pressure and the local pressure within the oscillation? From what I remember, I was always taught that the amplitude of any wave is the distance that a PARTICLE is displaced while the wave is passing. Just wanted to confirm. —Preceding unsigned comment added by 72.73.162.32 (talk) 07:03, 27 July 2010 (UTC)[reply]

Equation displacement x = A*sin(t-k) + b missing an omega?[edit]

(in "Formal Representation" section) Surely it should be A*sin(ωt-k) + b ? Harveybrown51 (talk) 19:19, 3 December 2011 (UTC)[reply]

Agreed, although it should be A*sin(ω(t-k)) + b if k is to be the time offset as stated in the article (rather than phase offset). It would also be clearer if t₀ and x₀ where used instead of k and b, and b were taken over to the lhs. Spinning Spark 23:23, 5 December 2011 (UTC)[reply]

Purpose of an Article, such as This One[edit]

Good articles are written so that laymen/women with some intelligence, but without a specialist background, can understand them. This article has been written and maintained by people with no idea how to translate scientific terminology into ordinary language that someone without a scientific background can understand. To use this sort of plain language, "It stinks." Tapered (talk) 03:09, 15 September 2015 (UTC)[reply]

What is the meaning of "non-zero" amplitude.[edit]

I'm searching the internet for a definition. You'd think this article would explain it. 2600:8801:BE31:D300:350B:FC57:5D61:625E (talk) 04:33, 23 July 2022 (UTC)[reply]

In English, "non-" as a prefix gives the meaning "not", and "zero" means "nothing". So a "non-zero" amplitude means "not nothing". It's as simple as that. --Wtshymanski (talk) 22:33, 13 August 2022 (UTC)[reply]

"Change in a single period"[edit]

The intro states that amplitude measures the change in a periodic vairable in "a single period", wouldn't the change in a period be zero? It starts off at some point then returns to that point. Wouldn't it be more accurate to say it measure displacement from equilibrium or something? Sunny642 (talk) 14:05, 6 May 2023 (UTC)[reply]